Always prepared, wherever you are

Power outage? No signal? Dark?
With the Beldeur® Emergency Radio, you're instantly prepared for any emergency. This compact, powerful all-in-one device combines a radio , power bank , LED flashlight , and three energy sources in one robust emergency tool you'll never want to be without.

Why you really need this emergency radio

🔋 Always energy – without a socket

Thanks to solar power , USB-C charging , and a hand crank , you'll always be reachable. Even when the lights go out or you're in the middle of nature.

📻 Stay informed about news & emergency messages

With the AM/FM radio, you can receive important updates during power outages, storms, or other emergencies. The retractable antenna ensures a stable signal.

📱 Charge your phone when it really matters

The built-in 2000mAh power bank gives your smartphone or other small devices that little bit of extra power to stay connected.

🔦 Bright LED flashlight for safety in the dark

Perfect for an evening walk, breakdown on the road or an unexpected blackout.

🧳 Compact, lightweight and portable

Pack it in your car, backpack, or emergency kit — it weighs only about 420 grams and takes up minimal space.

Suitable for:

✔ Emergencies & power outages
✔ Camping, outdoor & hiking
✔ Car/navigation backup
✔ Emergency kits for home or on the road

Choose security. Choose independence.

With this emergency radio you always have light, information and power at hand — regardless of the conditions.

An indispensable gadget for anyone who wants to be prepared.

This multifunctional corner mount can move in both directions. It allows you to mount the doorbell at an angle of up to 45 degrees . The corner mount uses a click system, allowing you to easily adjust it to the desired angle.

It is also possible to tilt the support downwards up to 15 degrees .

Using the included screws, you can easily screw the rear mounting plate onto the angle bracket, after which you can install it in the desired location. Finally, you can mount the video doorbell on the bracket and adjust it to the desired viewing angle. After adjusting, you can secure this angle by tightening the screws.

Mounting angle bracket from 4:39

Want to use your new doorbell wired and don't have a bell transformer? Then our adapter is the perfect solution. It supplies 18V AC power. The adapter simply plugs into a wall socket, and the 5-meter cable allows you to connect the wires to your desired mounting location.

This adapter only works with the DualCam Video Doorbell

Please note: Using a wifi booster is not necessary. If you have a stable connection at the desired mounting location, you do not need a wifi booster.

> Take the WiFi test here

Boost the WiFi signal at the desired mounting location of your doorbell or security camera and ensure optimal coverage. With this booster, you can enjoy a stable and reliable connection, so that your product always functions properly, without interruptions in the images or delays in notifications. This means that you can watch live and make recordings, without worrying about connection problems, even in hard-to-reach places in and around your home.

The wifi booster has a USB-A output and should be plugged into a wall socket, ideally halfway between the router and the desired mounting location of the product. The adapter that the wifi booster is plugged into is not included.

Please note: All our products are supplied complete with all necessary power and installation. This USB charging cable is a replacement part and not necessary for a complete set.

This versatile charging cable allows you to both charge your video doorbell and wire the chime (doorbell chime) for continuous use. The cable is designed to provide fast and reliable power, ensuring your doorbell is always ready for action and your chime can be used without interruption. A convenient solution for both charging the doorbell and directly connecting the chime.

The 1.6W solar panel with a 3-meter cable is the ideal solution to provide your security camera or video doorbell with sustainable power. The panel comes with an adjustable mounting bracket that can be adjusted in all directions, so you can always find the best angle for sunlight. In addition, the necessary plugs and screws are included for a quick and sturdy installation. Thanks to the powerful solar cells, the panel efficiently charges your device, even in indirect sunlight, so that your security system remains operational at all times without the hassle of batteries or power connections.

NOTE: This solar panel only works in combination with the products below

• Wireless Video Doorbell
• DualCam Video Doorbell
• Security camera with solar panel

Please note: All video doorbell packages already include a mounting plate. This item is intended as a replacement part, should you require an additional mounting plate or wish to install a new one. It is therefore not necessary to order this separately for a complete installation – the mounting plate is always included in the doorbell package.

The mounting plate forms the entire back of the video doorbell and provides a solid base for mounting. Simply place the mounting plate on the wall or door frame and then click the doorbell onto it for a stable and secure mounting.

Please note: All our products are supplied complete with all the necessary fittings and installation. This mounting kit is a replacement part and not necessary for a complete set.

The mounting kit contains all the necessary screws and plugs to securely and safely attach your product. This kit is complete with extra spare screws and plugs, so you always have enough for a perfect installation. In addition, a special security screw is included, which ensures that your product is securely attached and less susceptible to theft. This way, you have everything you need to complete the installation professionally and safely.

Please note: All Beldeur products come standard with strong adhesive strips; this product is intended as an extra set or replacement.

With the Beldeur Privacy Sticker Set, you can make it clear to visitors that your product is active and may be recording audio and video. These stickers are not only practical but also contribute to transparency and compliance with privacy regulations.

What's in the set?

• Two round stickers of 65 mm diameter: One Dutch and one English sticker, so you can inform visitors in both languages.
• Clear and professional message: With a clear icon and text that everyone quickly understands.

Key benefits

• Informs visitors: Ensures that everyone immediately knows that a camera is active.
• Privacy Compliance: Helps meet legal requirements surrounding the use of surveillance cameras.
• Easy to apply: Self-adhesive and suitable for various surfaces such as doors, windows and walls.
• Weatherproof: Made of durable material that can withstand rain, sun, and temperature changes.

Professional appearance

The stickers are sleekly designed and complement the modern look of your Doorbell camera. Place them in a prominent location, such as near the doorbell/camera or on a window, to immediately inform visitors.

Order the Privacy Sticker Set today and create a transparent and professional environment around your home!

Please note: all Beldeur video doorbells are supplied with a screwdriver set as standard; this product is intended as an additional set or replacement.

With the Beldeur screwdriver set, you have everything you need to install your video doorbell safely and securely. This set of two screwdrivers is specially designed for mounting the suspension system and tightening the security screw, so that your doorbell stays firmly in place.

What's in the set?

• Mounting screwdriver: Ideal for attaching the mounting plate to the wall or door frame.
• Security Screwdriver: Suitable for tightening the security screw, so that your doorbell is protected against theft.

Why choose the Beldeur screwdriver set?

• Perfectly matched to Beldeur doorbells: The screwdrivers are precisely matched to the screws supplied with our video doorbells.
• Durable and Reliable: Made of high quality steel for long lasting use.
• Handy size: Compact and easy to handle, ideal for both quick installation and maintenance.

Practical and Indispensable

Although each Beldeur video doorbell comes with one screwdriver as standard, this set is a handy addition. Perfect as a spare or to always have the right tool at hand for installation or adjustments.

Please note: All Beldeur video doorbells come standard with strong adhesive strips; this product is intended as an extra set or replacement.

Make installing your video doorbell easier than ever with Beldeur's strong adhesive strips . These specially designed strips provide a strong and secure mount for all our video doorbells, without drilling or damaging your wall.

Advantages of our adhesive strips

• Extremely strong grip: Developed to stay in place even in changing weather conditions.
• Suitable for various surfaces: Ideal for smooth and flat surfaces such as glass, metal, tiles and lacquered wood surfaces.
• Easy installation: Simply stick the strip in the desired location and press your video doorbell firmly into place. No tools required!
• Weatherproof: Resistant to rain, sun and temperature changes, perfect for outdoor use.
• Damage-free removal: Remove the strips without leaving any adhesive residue or damage.

Ideal for temporary or permanent mounting

Whether you're a tenant who can't make holes in the wall or simply looking for convenience, our adhesive strips offer the perfect solution. They're durable enough for permanent use, yet easy to replace when necessary.

Compatibility

The Beldeur adhesive strips are designed for our full line of video doorbells, including the wireless and DualCam models.

Order today and enjoy quick, easy, and reliable installation of your video doorbell!